# After Landing

<table data-header-hidden data-full-width="true"><thead><tr><th width="695"></th><th></th></tr></thead><tbody><tr><td><strong>01 - BRAKE PRESSURE</strong></td><td><strong>CHECKED</strong></td></tr><tr><td><strong>02 -</strong> <strong>FLAPS</strong></td><td><strong>UP</strong></td></tr><tr><td><strong>03 - SPOILERS</strong></td><td><strong>DOWN</strong></td></tr><tr><td><strong>04 - ANTI-SKID</strong></td><td><strong>OFF</strong></td></tr><tr><td><em>When speed is below approximately 20 knots, place main anti-skid switch off and check that no release indications appear.</em></td><td></td></tr><tr><td><strong>05 - IGNITION</strong></td><td><strong>OFF</strong></td></tr><tr><td><strong>06 - TRANSPONDER</strong></td><td><strong>STANDBY</strong></td></tr><tr><td><strong>07 - STABILIZER TRIM</strong></td><td><strong>ZERO</strong></td></tr><tr><td><strong>08 - APU</strong></td><td><strong>AS REQUIRED</strong></td></tr><tr><td><strong>09 - BLEED VALVES</strong></td><td><strong>CHECKED</strong></td></tr><tr><td>If APU is used for taxi-in, delay opening 2L and 2R bleed switches until APU has operated for one minute.</td><td></td></tr><tr><td><strong>10 - GALLEY POWER</strong></td><td><strong>OFF</strong></td></tr></tbody></table>