GND PROX FLAP OVRD and SLAT/FLAP LEVER
Last updated
Last updated
Inhibits triggering flap alerts in case of landings where flap configuration is different from normal landing flap configuration.
Selects slat/flap position by unlatching the lever and lifting a trigger below the head.
Position 4 and 5 are the same slat/flap degrees. Position 4 logic is for takeoff while position 5 logic is for landing. Position 4 logic does not provide for the landing gear aural warning on landing.
Caution: Using position 4 for landing is prohibited.
Flap settings approved for takeoff are: 1, 2, and 4.
Flap settings approved for landing are: 5 and FULL.
Go-Around:
Flaps 5 select flaps 2
Flaps FULL select flaps 4.