# T/O CONFIG and EICAS FULL \ ![](https://cdn.document360.io/417c2d4d-fdb8-4d4d-b11d-011fe445d776/Images/Documentation/image-1670245433858.png) ### TAKEOFF CONFIG CHECK BUTTON * Checks the takeoff configuration * Flap position: Matches the FMS Takeoff page 2/2 * Parking brake: OFF. * Pitch trim: In the green band. * Spoiler panels: Not deployed. * Simulates power levers in the advanced position. * Does not check that both engines are running. {% hint style="info" %} **Button Interaction** In order to start the T/O config test you have to keep the button pressed for 3 seconds. {% endhint %} ![](https://cdn.document360.io/417c2d4d-fdb8-4d4d-b11d-011fe445d776/Images/Documentation/image-1670245439618.png) ### EICAS FULL BUTTON * **PUSH IN:** EICAS full information presented. * **PUSH OUT:**Enables the automatic EICAS de-clutter logic. * De-clutter is disabled when the landing gear is extended and/or flap/slat is not at 0. * Automatic de-clutter occurs after landing gear retraction and flap/slad retraction, if all parameters are displaying normal indications. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.flightsim-studio.com/e-jet-series/systems-guide/central-pedestal/t-o-config-and-eicas-full.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.