FSS Documentation Hub
E-Jet Series
E-Jet Series
  • Introduction
    • Welcome
    • First Steps
    • FAQs
    • How To Update
  • Normal Procedures
    • Checklist
    • Limitations
    • Approach Types
    • Procedure Guide
  • Systems Guide
    • Overhead Panel
      • ELECTRICAL - AC
      • ELECTRICAL - DC
      • COCKPIT LIGHTS
      • ENGINE FIRE HANDLE
      • FUEL
      • PASSENGER SIGNS
      • FIRE EXTINGUISHER
      • APU CONTROL
      • WINDSHIELD WIPER
      • EXTERNAL LIGHTS
      • HYDRAULIC
      • PRESSURIZATION
      • ICE PROTECTION
      • AIR COND / PNEUMATIC
      • PASSENGER OXYGEN
      • GND PROX TERR INHIB AND EMERG/PRKG BRAKE
    • Main Panel
      • Primary Flight Display (PFD)
        • SPEEDS
        • FLIGHT MODE ANNUNCIATORS (FMA)
        • ALTITUDES
        • MARKER BEACONS
        • FLIGHT PATH / ATTITUDE INDICATIONS
        • HORIZONTAL SITUATION INDICATOR (HSI)
        • LATERAL/VERTICAL DEVIATION INDICATION
        • VERTICAL NAVIGATION (VNAV)
        • WIND DISPLAY / TIMER
        • FMS MODE ANNUNCIATORS
        • COM / NAV
        • DISPLAYS
      • Multifunction Display (MFD)
        • GENERAL
        • SYSTEMS/STATUS
        • SYSTEMS/ANTI ICE
        • SYSTEMS/ECS
        • SYSTEMS/ELEC
        • SYSTEMS/FLTCTRL
        • SYSTEMS/FUEL
        • SYSTEMS/HYDR
        • TCAS
        • WEATHER
      • EICAS
        • THRUST
        • FUEL / OIL
        • SLATS / FLAPS / SPEEDBRAKE
        • CREW ALERTING SYSTEM (CAS)
        • GEAR / BRAKE
        • APU
        • CABIN ALT / LFE
        • TRIM
      • Reversionary Panel
      • Integrated Electronic Standby System (IESS)
      • Autobrake
      • Gnd Prox Terr Inhib and EMERG/PRKG Brake
      • Clock
      • Landing Gear
      • ELT and GND PROX G/S INHIB
      • LG WRN INHIB and ADS Probes Heater
    • Central Pedestal
      • Multifunction Control Display Unit (MCDU)
      • FLIGHT CONTROL MODE
      • STALL WARNING
      • POWERPLANT
      • T/O CONFIG and EICAS FULL
      • Cursor Control Device (CCD)
      • SPEEDBRAKE / SPOILERS
      • THRUST LEVER QUADRANT
      • Ram Air Turbine (RAT)
      • GND PROX FLAP OVRD and SLAT/FLAP LEVER
      • AUDIO CONTROL
      • TRIM
      • COCKPIT DOOR CONTROL
      • EMERGENCY/PARKING BRAKE / PA
      • ELEVATOR / AILERON DISCONNECT
      • CONTROL WHEEL
    • Cockpit Floor
    • Cockpit Side
    • Head-Up Display
  • Autopilot Guide
    • Flight Director (FD)
    • Autopilot (AP)
    • Yaw Damper (YD)
    • AFCS Indications on PFD
    • FGCS Lateral Modes
    • FGCS Vertical Modes
    • Steep Approach Mode
    • Speed Control
  • MCDU Guide
    • TRS - Thrust Rating System
  • ⭐Special Features
    • Cabin Announcements
    • GSX Automation
  • 📂Supplements
    • GSX Profiles
    • SimBrief Profiles
    • Hardware Integration
    • PaintKit
    • Landing Distance Calculator
Powered by GitBook
On this page
  • RECIRC BUTTON
  • PACK (1) (2) BUTTON
  • BLEED (1) (2) BUTTON
  • CKPT TEMPERATURE SELECTOR
  • PAX CABIN TEMPERATURE SELECTOR
  • XBLEED BUTTON
  • BLEED APU BUTTON
  1. Systems Guide
  2. Overhead Panel

AIR COND / PNEUMATIC

PreviousICE PROTECTIONNextPASSENGER OXYGEN

Last updated 1 year ago

Share feedback

Thanks for sharing your feedback!

RECIRC BUTTON

PUSH IN: Allows automatic operation by the AMS. Turns on both recirculation fans, according to system logic.

PUSH OUT: Turns off both recirculation fans.

PACK (1) (2) BUTTON

PUSH IN: Allows automatic operation by the AMS. Opens the respective pack flow control valve.

PUSH OUT: Manually closes the respective pack flow control valve.

NOTE: During first engine start, Emergency Ram Air Valve Built-In Test (BIT) commands PACK 1 OFF.

BLEED (1) (2) BUTTON

PUSH IN: Allows automatic operation by the AMS. Commands the respective engine bleed valves, according to system logic.

PUSH OUT: Manually closes the engine bleed valves.

CKPT TEMPERATURE SELECTOR

Controls cockpit temperature relative to the knob position.

PAX CABIN TEMPERATURE SELECTOR

Controls passenger cabin temperature relative to the knob position.

ATTND position: Enables the flight attendant panel(s) to control the cabin temperature. An “ENABLED” led turns on in the flight attendant panel(s) indicating they have control of the temperature.

XBLEED BUTTON

PUSH IN: Allows automatic operation by the AMS. This position opens the cross-bleed valve, according to system logic.

PUSH OUT: Manually closes the cross-bleed valve.

BLEED APU BUTTON

PUSH IN: Allows automatic operation by the AMS. Commands the APU bleed valve, according to system logic.

PUSH OUT: Closes the APU bleed valve.