Section 9 - Supplements
  • 22 May 2023
  • 2 Minutes to read
  • Contributors
  • Dark
    Light

Section 9 - Supplements

  • Dark
    Light

Article Summary

Overview

The Tecnam P2006t comes with several unique features that simulate several items such as Ground Power Unit (GPU), Animated Paper Checklist, Emergency Escape Hatch, Emergency Landing Gear Extension, Special Mission Platform (SMP) Livery and adding your own unique objects to the aircraft.

Animated Paper Checklist

The aircraft has an animated paper checklist, stowed initially on top of the Pilot Side glareshield. To see the checklist, simply click on the paper.

The Paper then will move to the left side of the PFD. On the paper, there are three icons that will correspond to some actions:

- Close (X):The Checklist Paper will be put back to its original position
- Stow (Arrow Down) :The Checklist Paper will be stowed to the Pilot side pocket door 
- Rotate (Circular Arrow) :The Checklist Paper will be rotated to show the other side of the paper

All of the icons (actions) available on both sides of the paper.

If the paper had been stowed to the Pilot side pocket door, simply hover and click on the paper checklist to put it back to the side of the PFD.

Emergency Escape Hatch

The aircraft is equipped with an Emergency Escape Hatch on the top of the cabin. 

The steps to operate the Emergency Escape Hatch are as follows:

Step 1
Left-click on the handle and move downwards (negative Y axis) to rotate the handle to the OPEN position.
Note
Notice the PUSH DOOR action not available when handle in LOCK position.
Step 2
While pressing the left-click on OPEN Position, use the right-click to do the PUSH DOOR activity
Step 3
To close and lock the door, just do the previous steps in the opposite order.

Emergency Landing Gear Extension

The aircraft also simulates the steps required to manually deploy the Landing Gears in case of fault in the normal procedure mechanism. The steps to perform the procedure are as follows:

Note
The steps can only be done in Pro Operation Mode
Step 1
Simulate electrical failure to the Landing Gear by pulling the Circuit Breaker for Landing Gear.
Step 2
Deploy the Landing Gears by moving the Landing Gear Lever to DOWN position. Notice the Landing Gears won't come down from the MFD or by shifting the view simulation to the external camera.
Step 3
Open Emergency Landing Gear Extension hatch on the floor of the pilot seat.
Step 4
Rotate the RH knob by clicking it, then wait for approximately 20 seconds.
Step 5
Rotate the LH knob by clicking it. Notice the landing gears will deploy instantly.

Special Mission Platform (SMP) Livery

The Tecnam P2006t includes a very special livery which is called the Special Mission Platform (SMP) version. The livery is based on MRI (Maritime Reconnaissance Intelligence) which is a maritime surveillance version of the Tecnam P2006t designed and developed by Indra.

The aircraft include two glass roofs that allows the pilot and co-pilot to have a view to the top of the cabin. Each glass has a cover/shade that can be clicked to stow it to the pilot side door pocket alongside with the pitot covers. 

On the back, we have an observer station on the right seat with controls to the camera attached on the belly of the aircraft.

Key Bindings

The aircraft uses default MSFS key bindings wherever possible. All others need to be linked to LVARs. They are present from v1.0.3 onwards.

Description
LVAR
Range
Carb heat lever left
FSS_P2006T_BINDING_CARB_HEAT_LEVER_1
0-1
Carb heat lever right
FSS_P2006T_BINDING_CARB_HEAT_LEVER_2
0-1
Engine choke leftFSS_P2006T_BINDING_ENGINE_CHOKE_1
0=off 1=on
Engine choke right
FSS_P2006T_BINDING_ENGINE_CHOKE_2
0=off 1=on
CWS yoke buttonFSS_P2006T_BINDING_YOKE_CWS
0=released 1=pressed
Backup battery coverFSS_P2006T_BINDING_BACKUP_BATTERY_COVER
0=closed 1=lifted
Master battery switchFSS_P2006T_BINDING_MASTER_BATTERY
0=off 1=on
Pitot heat switchFSS_P2006T_BINDING_PITOT_HEAT
0=off 1=on